• Diamond Brite - 5 litre

 Diamond Brite - 5 litre

Low Maintenance Wet Look Floor Polish



Easy to use - no burnishing required. Maximum scuff resistance. Low maintenance requirement.

•Dries to a wet look gloss.

•Protects and prolongs the life of flooring materials. 


 For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminated flooring.


 Diamond Brite must be applied to a clean dry floor. If required strip old polish with Selate or Selstrip. Apply a thin even film using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). Additional coats enhance the finish. May be readily maintained with Selsheen or Fastlane. Coverage rate: 60 square metres per litre.



  • Composition - An advanced blend of styrene/acrylic polymer, wax, wetting agents, film-forming agents and preservative in a water based emulsion form incorporating metal cross linking additives.
  • Appearance - Thin, translucent emulsion
  • Colour - White
  • Viscosity - <10cps
  • Density - 1.039
  • pH - 8.0 - 9.0
  • Activity - 25%
  • Fragrance - Characteristic slightly sweet
  • Stability - Two years minimum in unopened container
  • Biodegradability - All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.
  • Storage - Protect from freezing
  • Flashpoint - >100
Product is for professional use only.

Write a review

Note: HTML is not translated!
    Bad           Good

Diamond Brite - 5 litre

  • Brand: Selden
  • Product Code: A014_DIAMONDBRITE
  • Availability: 2-3 Days
  • £17.80